<< back to Energy and Fuels Home

watch energy saving tips videos

direct energy Article


(physics) a thermodynamic quantity equivalent to the capacity of a physical system to do work; the units of energy are joules or ergs; "energy can ...

direct energy Navigation

 

Facts About Solar Energy
Green Energy
Hydroelectric Energy
Direct Energy



Below, you'll find extensive information on leading Energy and fuel articles and products to help you on your way to success.

Why Do Digital Camera Batteries Run Dry So Fast?
By Jacob Georgeson
Digital cameras are useless when their batteries run dry. Battery technologies have improved a lot in the last years but batteries still have just a limited energy capacity. To get more out of your batteries you should understand what digital camera feature consumer more power and how to minimize energy consumption.
Not all camera elements consume the same amount of energy. You can save battery energy by minimizing usage of battery energy guzzling features. The following is a list of battery hungry battery features minimizing usage of those features will provide you with longer battery life.
The digital camera elements can be divided to electronic and mechanical. The chipset and the CCD for example are electronic while the lenses focus motors are mechanical. Generally speaking mechanical elements tend to consume more energy than electronic elements for the same amount of usage time. The exception is the LCD screen that is an electronic element but is also a battery hungry one.
Here is a list of three components that consume the most energy in a typical digital camera and some ideas for how to minimize their consumption.
The LCD screen: Digital cameras allow viewing of digital photos immediately after they were taken on a small bright LCD screen built into the camera. This allows you to review the digital photo composition and to decide if the digital photo is good or if you need to take more photos. LCD screens are also convenient when used as view finders. You can use the LCD to see a real time view of the picture the camera is capturing and then hit the shutter button when you got the digital

photo you are looking for. The drawback of the colorful bright LCD screen is that it consumes a lot of energy. If you ever wondered why those LCD screen are turned off automatically by the camera it is to save energy as if they were left on all the time the battery would last a very short time. To save battery try to minimize the usage of the LCD screen. If you have an optical view finder use it whenever possible instead of the LCD. Manually turn off the LCD and only turn it on when absolutely necessary to either access some digital camera menus or to preview a digital photo.
The motors: The digital camera mechanical components are powered by electrical motors. For example an auto focus is implemented by motors that move the lenses in and out. Some digital cameras also include motors that let the photographer control the zoom factor with a press of a button. Motors are electro-mechanical components. They are high energy consumers. The bigger and heavier the lens, for example using high zoom telescopic lenses, and the optical elements that the motor has to move the more energy is consumed. To minimize battery consumption move the digital camera components manually whenever possible. For example if the camera supports zoom in zoom out buttons avoid using them and instead manually move the lenses ring to change the zoom. Try to focus only when you are ready to take a digital photo. Avoid using continuous focusing and holding the shutter button half way for a long time as the motors will keep moving and consume energy during all that time.
The flash: Flash is used when taking digital photos in dark scenes or as fill-in when there are shades on the objects. Flash is an electro-optical component. Energy is charged into a special electronic component and later on that energy is discharged in a short time in the form of light energy. In general the brighter and longer distance a flash unit supports the more energy it consumes. Avoid using flash in scenes where there is enough ambient light.

Jacob Georgeson is an amateur photographer and business guru. Visit battery for more information about this and other topics. Mr. Georgeson writes about financial and Internet subjects. This article can be reprinted as long as the resource box including the backlink is included.


 

We strive to provide only quality articles, so if there is a specific topic related to energy and fuels that you would like us to cover, please contact us at any time.

And again, thank you to those contributing daily to our Energy and fuels website.

Additional Related Resources      
Halogen Bulbs Light Up The Path To Energy Efficiency
By dushan
Electric lighting is used in the majority of households throughout the EU and contributes significantly to peak electricity demand. This is particularly pertinent to the UK, Germany and Sweden which Read more...
Saving Energy When Using Your Tumble Dryer
By Glyn booth
Energy-class labels on tumble dryers are there to help you choose a more energy-efficient model thus saving money on your electricity bill, and being more eco-friendly. The classes go from A (the Read more...
Easy Ways To Develop Your Psychic Skills
By Conrad Raw
Everyone has within them some amount of psychic ability. It is innate in people, just like the ability to paint or play a musical instrument. With training we can learn to play the piano, and in the Read more...
Energy Healing 101: Pranic, Tantric, And Reiki
By Arjan van Hemert
If you're seriously interested in knowing about Energy Healing, you need to think beyond the basics. This informative article takes a closer look at things you need to know about Energy Healing. Read more...
© 2006 MIGRANS.NET. All rights reserved. Energy and fuels